RCDD-001

RCDD-001 practice questions, page 11 of 15, with answer review and explanations.

Question 51

When installing outlet boxes in ten private offices in an area which may prove to be difficult to install future additional telecommunications outlets, the MINIMUM quantity of outlet boxes that should be installed is:

  1. 10
  2. 20
  3. 30
  4. Based on the type of cabling specified

Question 52

Assuming the total fill capacity of a pathway is 100 cables (all of the same cable type and size), the MAXIMUM number of cables to be installed during the initial installation, without exceeding the fill ratio is:

  1. 25
  2. 40
  3. 50
  4. 60

Question 53

On a project with three small conference rooms, a break room, and twelve private offices, what is the MINIMUM number of telecommunications outlet boxes required?

  1. 16
  2. 24
  3. 28
  4. 40
  5. 46

Question 54

A telecommunications outlet/connector may be provided using all listed below EXCEPT:

  1. Wireless AP connectivity
  2. Balanced twisted-pair outlets
  3. Optical fiber connectors
  4. 4p4c (4 position, 4 contact) connector

Question 55

Important considerations when designing telecommunications distribution within modular furniture include all of the following EXCEPT:

  1. How the furniture pathways will be connected to horizontal building pathways
  2. Separation of telecommunications cabling and electrical power
  3. Diameter of cable to be installed
  4. Maximum initial fill ratio of 40 percent when derated because of corners