HPE7-A06 Practice Test

HPE7-A06 Practice Test practice questions, page 5 of 5, with answer review and explanations.

Question 21

You are tasked with describing VSX to a colleague. Select the three items that are considered best practices for implementing VSX on AOS-CX. (Choose three.)

  1. Allow VLAN 1 on all trunks in order to facilitate ZTP for downstream devices.
  2. Set a VSX system-mac manually to simplify switch replacement of the primary if required.
  3. Adjust MTU on the ISL link to permit transport of jumbo frames if endpoints require it.
  4. Configure all VLANs manually on both the primary and secondary nodes before enabling vsx-sync.
  5. Adjust the default keepalive timers to match or exceed the ISL hold interval.
  6. Use a direct L3 circuit for the keepalive connection between both nodes.

Question 22

You are configuring an HPE Aruba Networking gateway cluster with AOS-10. What is true about gateway functionality? (Choose two.)

  1. PAPI traffic is traversing through an IPSEC tunnel.
  2. LACP is not supported when manually provisioning gateways.
  3. Multiversioning between AP and gateways is not supported.
  4. AOS-10 only supports high-value client session synchronization for the first failover.
  5. User traffic in tunneled mode is encrypted per default.

Question 23

A Python developer was able to read but could not modify the VLAN database on an AOS-CX switch through the REST API. Which settings should the developer check first? (Choose two.)

  1. HTTPS settings
  2. SNMP settings
  3. SSH settings
  4. cookie settings
  5. REST API settings