AX0-100

AX0-100 practice questions, page 3 of 6, with answer review and explanations.

Question 11

Axis recommends shielded cables for outdoor installations primarily to ensure

  1. Image quality.
  2. Surge protection.
  3. Life time of cable installations.
  4. Conformity with SMPTE standard.

Question 12

In setting up PTZ control for an Axis encoder, it's very easy to overlook a very important step in the configuration process. After properly connecting the communication wires to the encoder, the next recommended step in the setup is:

  1. Downloading the correct Device ID from the Axis website
  2. Setting the Baud Rate to match the analog PTZ' s
  3. Setting the Device ID to match the analog ID
  4. Uploading the correct PTZ driver

Question 13

Which setting would best adjust a hard yellow tint as shown in the pictures below?

  1. Image contrast
  2. White balance
  3. Color saturation
  4. Image brightness

Question 14

Which is an impact on cameras that are operating above their specified temperature limit?

  1. Noise is increased
  2. Frame rate is reduced
  3. Light sensitivity is decreased
  4. Resolution is reduced

Question 15

Which technology can a Video Management Software (VMS) partner incorporate to reduce the impact on recorded video during server maintenance?

  1. Local storage at the camera
  2. Meta data stream
  3. AXIS Camera Application Platform (ACAP)
  4. SNMP