300-410 Practice Test

Question 111

Refer to the exhibit. The network administrator configured VRF lite for customer A. The technician at the remote site misconfigured VRF on the router. Which configuration will resolve connectivity for both sites of customer_a? A. B. C. D.

Question 112

What does the PE router convert the IPv4 prefix to within an MPLS VPN?

1. eBGP path association between the PE and CE sessions
2. prefix that combines the ASN, PE router-id, and IP prefix
3. 48-bit route combining the IP and PE router-id
4. VPN-IPv4 prefix combined with the 64-bit route distinguisher

Question 113

Refer to the exhibit. Which interface configuration must be configured on the HUB router to enable MVPN with mGRE mode?

1. interface Tunnel0 description mGRE - DMVPN Tunnel ip address 10.1.0.1 255.255.255.0 ip nhrp map multicast dynamic ip nhrp network-id 1 tunnel source 172.17.0.1 ip nhrp map 10.0.0.11 172.17.0.2 ip nhrp map 10.0.0.12 172.17.0.3 tunnel mode gre
2. interface Tunnel0 description mGRE - DMVPN Tunnel ip address 10.0.0.1 255.255.255.0 ip nhrp map multicast dynamic ip nhrp network-id 1 tunnel source 10.0.0.1 tunnel mode gre multipoint
3. interface Tunnel0 description mGRE - DMVPN Tunnel ip address 10.0.0.1 255.255.255.0 ip nhrp network-id 1 tunnel source 172.17.0.1 tunnel mode gre multipoint
4. interface Tunnel0 description mGRE - DMVPN Tunnel ip address 10.0.0.1 255.255.255.0 ip nhrp map multicast dynamic ip nhrp network-id 1 tunnel source 10.0.0.1 tunnel destination 172.17.0.2 tunnel mode gre multipoint

Question 114

How are MPLS Layer 3 VPN services deployed?

1. The RD and RT values must match under the VRF.
2. The import and export RT values under a VRF must always be the same.
3. The label switch path must be available between the local and remote PE routers.
4. The RD and RT values under a VRF must match on the remote PE router.

Question 115

Which IGPs are supported by the MPLS LDP autoconfiguration feature?

1. IS-IS and RIPv2
2. RIPv2 and OSPF
3. OSPF and EIGRP
4. OSPF and IS-IS