299-01

299-01 practice questions, page 4 of 10, with answer review and explanations.

Question 16

How do Cascade Performance Analytics assist with Performance Monitoring?

  1. By setting intelligent static thresholds for Application metrics and Interface metrics, tolerance can be determined. Cascade will use these thresholds and tolerances to report on deviations indicative of performance problems.
  2. The Customer only needs to identify their critical hosts, interfaces and/or applications, and Cascade will automatically baseline their behavior and report on deviations indicative of performance problems.
  3. The Performance Analytics use knowledge of hosts, interfaces, and/or applications are able to detect security threats such as host scans and worms.
  4. After baselining is completed, Cascade can re-route congested traffic to avoid congested application delivery paths.

Question 17

When editing a previously configured service policy, what options become available if you click the 'show advanced settings' checkbox? (Select 3)

  1. Allows enabling/disabling the detection of dips in the metric.
  2. Allows tuning of the tolerance range of the metric.
  3. Allows setting of a noise floor for the metric.
  4. Allows adjusting the notifications for the metric.
  5. Allows enabling/disabling the detection of spikes in the metric.

Question 18

Which of the following configuration changes can be used to reduce the number of alerts generated overall for a Service?

  1. Edit each Service policy to increase the Tolerance slider for Low and High alerts.
  2. Edit each Service policy and set a noise floor to specify the minimum amount of change that the policy can treat as deviation from normal behavior.
  3. Edit the Service and select fewer metrics to monitor for each segment that comprises the Service.
  4. Modify the location host group type used for monitoring end user traffic to use fewer groups (for example, Region instead of Site).
  5. A, B, C, and D.
  6. A and B only.

Question 19

If a report table on Cascade Profiler includes the "Server Delay" column but shows no value for "Server Delay" in some cells, what are the possible causes? (Select 3)

  1. The time span of the report does not cover any connection set-up points
  2. Server delay is zero.
  3. The protocol used by the application in not TCP-based.
  4. Application traffic was not seen by a Cascade Sensor.
  5. The server plug-in is needed to measure "Server Delay" and not functioning correctly.

Question 20

Within the Cascade Pilot GUI, filtered items are often indicated:

  1. With red text.
  2. With yellow text.
  3. With a funnel icon.
  4. With a hash-mark icon.