299-01: Riverbed Certified Solutions Professional - Network Performance Management
299-01: Riverbed Certified Solutions Professional - Network Performance Management practice questions, page 3 of 10, with answer review and explanations.
Question 11
What is the relationship between a Host Group and a Host Group Type in Cascade Profiler?
A Host Group Type is a container that may contain multiple Host Groups.
A Host Group Type defines the name of the Host Group.
They are the same thing.
Each Host Group must be defined by the Type of application it serves; this is the Host Group Type.
Question 12
Cascade Profiler's Switch Integration feature uses SNMP and adds the capability for Cascade to report on which of the following. (Select 2)
User name
Host IP address
Host MAC address
The physical switch port a specific host is connected to
Switch port traffic levels
Switch port status
SNMP traps from the switch
Question 13
What are the two types of dashboards available within the Cascade Profiler GUI? (select 2)
Top Hosts
Top Applications
Public
Private
Devices and Interfaces Utilization
Question 14
If unable to connect to the Cascade Shark Appliance from the Cascade Pilot console it could be because. (Select 2)
The correct communication port(s) are NOT open on the firewall between Cascade Pilot and Cascade Shark.
The Cascade Shark is placed in "passthru" mode so Cascade Pilot access is not available
The Cascade Shark appliance has no capture jobs configured.
You may be running Cascade Pilot-Personal-Edition (PE). You need the full version of Cascade Pilot to connect to Cascade Shark.
Trend/Index data is disabled on the Cascade Shark Appliance.
Question 15
What is a good way to know whether all internal IP addresses seen by the Cascade Profiler have been grouped in a particular group type?
Run Automatic grouping for all group types.
Configure an Undefined group type with definition 0.0.0.0/0; confirm there are no entries when you 'view members' of this 'Undefined' group'.
There is no way to do this and successfully capture all the IP addresses.
Configure an Undefined group type with definition 0.0.0.0/32.
Run a report by hosts and look for undefined groups.