200-301 Practice Test

200-301 Practice Test practice questions, page 26 of 56, with answer review and explanations.

Question 126

What are the two functions of SSIDs? (Choose two.)

  1. uses the maximum of 32 alphanumeric characters
  2. controls the speed of the Wi-Fi network
  3. used exclusively with controller-based Wi-Fi networks
  4. supports a single access point
  5. broadcasts by default

Question 127

Which two characteristics describe the access layer in a three-tier network architecture? (Choose two.)

  1. serves as the network aggregation point
  2. physical connection point for a LAN printer
  3. designed to meet continuous redundant uptime requirements
  4. layer at which a wireless access point connects to the wired network
  5. provides a boundary between Layer 2 and Layer 3 communications

Question 128

Which PoE mode enables powered-devices detection and guarantees power when the device detected?

  1. auto
  2. static
  3. dynamic
  4. active

Question 129

Refer to the exhibit. The router has been configured with a super net to accommodate the requirements for 380 users on a Subnet. The requirement already considers 30% future growth. Which configuration verifies the IP subnet on router R4?

  1. Subnet: 10.7.54.0 Subnet mask: 255.255.128.0 Broadcast address: 10.5.55.255 Usable IP address range: 10.7.54.1 ג€" 10.7.55.254
  2. Subnet: 10.7.54.0 Subnet mask: 255.255.255.0 Broadcast address: 10.7.54.255 Usable IP address range: 10.7.54.1 ג€" 10.7.55.254
  3. Subnet: 10.7.54.0 Subnet mask: 255.255.254.0 Broadcast address: 10.7.54.255 Usable IP address range: 10.7.54.1 ג€" 10.7.55.254
  4. Subnet: 10.7.54.0 Subnet mask: 255.255.254.0 Broadcast address: 10.7.55.255 Usable IP address range: 10.7.54.1 ג€" 10.7.55.254

Question 130

Refer to the exhibit. Configurations for the switch and PCs are complete. Which configuration must be applied so that VLANs 2 and 3 communicate back and forth?

  1. interface GigabitEthernet0/0 ip address 10.10.2.10 255.255.252.0
  2. interface GigabitEthernet0/0.10 encapsulation dot1Q 3 ip address 10.10.2.10 255.255.254.0
  3. interface GigabitEthernet0/0.3 encapsulation dot1Q 3 native ip address 10.10.2.10 255.255.252.0
  4. interface GigabitEthernet0/0.3 encapsulation dot1Q 10 ip address 10.10.2.10 255.255.255.252