200-301 Practice Test

200-301 Practice Test practice questions, page 16 of 56, with answer review and explanations.

Question 76

A network engineer must configure the router R1 GigabitEthernet1/1 interface to connect to the router R2 GigabitEthernet1/1 interface. For the configuration to be applied, the engineer must compress the address 2001:0db8:0000:0000:0500:000a:400F:583B. Which command must be issued on the interface?

  1. ipv6 address 2001::db8:0000::500:a:400F:583B
  2. ipv6 address 2001:db8:0::500:a:4F:583B
  3. ipv6 address 2001:db8::500:a:400F:583B
  4. ipv6 address 2001:0db8::5:a:4F:583B

Question 77

What is a network appliance that checks the state of a packet to determine whether the packet is legitimate?

  1. Layer 2 switch
  2. LAN controller
  3. load balancer
  4. firewall

Question 78

What is a role of access points in an enterprise network?

  1. integrate with SNMP in preventing DDoS attacks
  2. serve as a first line of defense in an enterprise network
  3. connect wireless devices to a wired network
  4. support secure user logins to devices on the network

Question 79

An implementer is preparing hardware for virtualization to create virtual machines on a host. What is needed to provide communication between hardware and virtual machines?

  1. router
  2. hypervisor
  3. switch
  4. straight cable

Question 80

How does a Cisco Unified Wireless Network respond to Wi-Fi channel overlap?

  1. It allows the administrator to assign the channels on a per-device or per-interface basis.
  2. It segregates devices from different manufactures onto different channels.
  3. It analyzes client load and background noise and dynamically assigns a channel.
  4. It alternates automatically between 2.4 GHz and 5 GHz on adjacent access points.