200-301 Practice Test

200-301 Practice Test practice questions, page 15 of 56, with answer review and explanations.

Question 71

Drag and drop the TCP/IP protocols from the left onto their primary transmission protocols on the right. Select and Place:

Question 72

An engineer observes high usage on the 2.4GHz channels and lower usage on the 5GHz channels. What must be configured to allow clients to preferentially use 5GHz access points?

  1. Client Band Select
  2. Re-Anchor Roamed Clients
  3. OEAP Spilt Tunnel
  4. 11ac MU-MIMO

Question 73

Which networking function occurs on the data plane?

  1. processing inbound SSH management traffic
  2. sending and receiving OSPF Hello packets
  3. facilitates spanning-tree elections
  4. forwarding remote client/server traffic

Question 74

Under which condition is TCP preferred over UDP?

  1. UDP is used when low latency is optimal, and TCP is used when latency is tolerable.
  2. TCP is used when dropped data is more acceptable, and UDP is used when data is accepted out-of-order.
  3. TCP is used when data reliability is critical, and UDP is used when missing packets are acceptable.
  4. UDP is used when data is highly interactive, and TCP is used when data is time-sensitive.

Question 75

Refer to the exhibit. Shortly after SiteA was connected to SiteB over a new single-mode fiber path, users at SiteA report intermittent connectivity issues with applications hosted at SiteB. What is the cause of the intermittent connectivity issue?

  1. Interface errors are incrementing.
  2. High usage is causing high latency.
  3. An incorrect SFP media type was used at SiteA.
  4. The sites were connected with the wrong cable type.