VCS-274

VCS-274 practice questions, page 2 of 3, with answer review and explanations.

Question 6

Which command can an administrator execute on a NetBackup client to measure backup performance?

  1. bpbkar
  2. bptestnetconn
  3. bpclntcmd
  4. bpclient

Question 7

A storage unit group is configured that has disk and then tape listed. During a backup session, jobs start retrying and then running on the tape device only. What is a likely cause of the change?

  1. The disk storage unit is full.
  2. The tape device was listed first in the storage unit group.
  3. The tape device was listed second in the storage unit group.
  4. The disk storage unit is staging to tape.

Question 8

How frequently does content router queue processing (CRQP) run, by default?

  1. every 6 hours
  2. every 12 hours
  3. every 24 hours
  4. every week

Question 9

A tape library had the robot firmware upgraded and now the robot is reading the barcodes with additional characters. How should an administrator enable NetBackup to use the same characters as before the firmware upgrade occurred?

  1. update the Media ID Generation setting
  2. update Media settings
  3. update Device mappings
  4. update the Barcode Rules settings

Question 10

Which scenario accurately describes the creation of a full synthetic backup using tape?

  1. a single drive can be used for both the read and write of the backup
  2. a separate read drive and write drive can be used on the same Media Server
  3. a read and write drive can be used on different Media Servers
  4. a disk storage unit must be used prior to copying the backup to tape