RCDD-001

RCDD-001 practice questions, page 8 of 15, with answer review and explanations.

Question 36

What is the International Organization for Standardization/International Electrotechnical Commission ISO/IEC class rating for American National Standards Institute/Telecommunication Industry Association (ANSI/TIA) Category 5e cable?

  1. Class B
  2. Class C
  3. Class D
  4. Class E
  5. Class F

Question 37

You must extend a video systems backbone coax cable that was recently installed. Which of the following coaxial cable types would provide the best performance for both analog and digital video?

  1. Series 6
  2. Series 11
  3. RG 16
  4. RG 59
  5. RG 62

Question 38

Which of the following is NOT a design consideration for broadband video distribution?

  1. Amplifier link budgets
  2. Adhering to the 90 meter (295 feet) rule for horizontal distribution
  3. Amplifier cascade limitations
  4. Environmental factors
  5. Drop length

Question 39

The RJ-45 is now known as the 8P8C style connector, per the Telecommunications Industry Association (TIA) standard. What does the P and C stand for?

  1. Plug and connector
  2. Position and connector
  3. Position and contact
  4. Plug and contact

Question 40

Which of the following is true about screened twisted pair cable assemblies?

  1. The drain wire and screen foil must be bonded at one end only.
  2. The drain wire and screen foil must be bonded at every connection.
  3. There is no need to bond the screen foil or drain because it is not important.
  4. The drain wire and screen foil must be separately bonded at opposite ends.