NS0-507 practice questions, page 3 of 4, with answer review and explanations.
Question 11
Referring to the diagram shown in the exhibit, what will happen when the SAS adapter in slot 2 on Node A fails?
Node A will continue to access all drives through the onboard SAS port 0a.
Node A will lose all access to all drives.
Node A will continue to access all drives through the Infiniband connection with Node B.
Node A will shut down until SAS adapter in slot 2 is replaced.
Question 12
You have a switch called "NK5-A". The switch is configured with an NP_Port. Which switch feature on NK5-A uses NP_Ports to allow for fabric expansion of new FC switches without having to designate additional domain IDs?
NPIV
NPV
FCIP
F_port channel trunking
Question 13
When a new LUN is allocated, which volume and LUN configuration will use the smallest amount of storage?
Volume guarantee none, fractional reserve 0, space reservation disabled
Volume guarantee none, fractional reserve 0, space reservation enabled
Volume guarantee volume, fractional reserve 100, space reservation enabled
Volume guarantee volume, fractional reserve 100, space reservation enabled
Question 14
You need to take a cluster node down for extended maintenance, but you want to the FC LIF to avoid re-zoning the switch fabric. In this scenario, which three steps are required to move the FC LIF so it is available on another node? (Choose three.)
Use the network interface migrate command to migrate the new home node and the new home port
Perform a takeover and giveback operation for the new destination node
Use the network interface modify command to modify the new home node and the new home port
Bring the LIF online
Take the LIF offline
Question 15
You need to perform a DR test on a FAS8200 with SAN LUNs using the onboard UTA2 with 16Gb SFP+. In this scenario, what is the minimum port speed required on the DR Sites FC switches?