NS0-183 practice questions, page 2 of 3, with answer review and explanations.
Question 6
A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2-node FAS8300 cluster. The storage administrator wants to preserve the existing data. In this scenario, which two capabilities are available to the storage administrator? (Choose two.)
the ability to move the volumes from the old nodes to the new nodes
the ability to pull out the tray of internal disks of the FAS2520s and reseat the tray in the internal storage of the FAS8300s
the ability to create a 4-node MetroCluster across the four nodes
the ability to convert the FAS2520s to disk shelves and attach them to the new nodes
Question 7
You need to install a cluster with a FAS2720 HA pair and a FAS8300 HA pair. Which NetApp tool will verify which cluster interconnect switches support this configuration?
Active IQ Config Advisor
Interoperability Matrix Tool (IMT)
Hardware Universe (HWU)
mysupport.netapp.com site
Question 8
When you install a new ONTAP 9.7 4-node cluster, which network type is required?
data network
peering network
cluster interconnect
intercluster network
Question 9
You are planning to install a new ONTAP 9.7 All SAN Array (ASA) into your existing data center. In this scenario, which cluster configuration is allowed with ASA controllers?
Add the ASA controllers to an existing 4-node cluster with NAS licenses.
ASA controllers can only be added to clusters that have existing SAN licenses.
ASA controllers can only be installed as a standalone HA pair.
Add the ASA controllers to an existing 10-node cluster.
Question 10
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other. In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?