NS0-171

NS0-171 practice questions, page 2 of 3, with answer review and explanations.

Question 6

Which set of commands maps VLAN 100 to VSAN 100?

  1. Nexus 5000-A#configure terminal Nexus 5000-A (config) # vlan 100 Nexus 5000- A (config-vlan_ #fcoe vsan 100
  2. Nexus 5000-B# configure terminal Nexus 5000-B (config) # vsan database Nexus 5000-B (config-vsan)# vsan 100 Nexus 5000-B(config- vsan) #vsan 100 name FCoE-VLAN 100
  3. Nexus 5000-A#configure terminal Nexus 5000-B (config) # vsan database Nexus 5000-A (config)# vsan 100 Nexus 5000-A (config-vsan) # fcoe vsan 100
  4. Nexus 5000-B# configure terminal Nexus 5000-B(config-vsan) # vlan 100

Question 7

Which feature allows Cisco Nexus 7000 Series switches to be virtualized at the device level?

  1. PONG
  2. VLAN
  3. VRF
  4. VDC

Question 8

A Cisco UCS chasis has two power suppliers connected to one PDU and two power supplies connected to another PDU. You would like to protect against the failure of one entire PDU. In this scenario, which power policy should you configure in UCS Manager?

  1. N+1
  2. redundant
  3. N+2
  4. grid

Question 9

Your customer needs a new Nexus switch that can support at least ten 40GbE ports, and has room for future growth. Your customer would also like the new switch to be Application Centric Infrastructure- ready. Which switch meets these requirements?

  1. Nexus 7004
  2. Nexus 5672
  3. Nexus 6004
  4. Nexus 9504

Question 10

After deploying a FlexPod solution, which tool would you use to validate a successful installation?

  1. Hardware Universe
  2. Config Advisor
  3. System Manager
  4. UCS Manager