NCP-AII

NCP-AII practice questions, page 5 of 7, with answer review and explanations.

Question 21

A system administrator needs to install a container toolkit and successfully run the following commands: What step should be taken next to finish the installation?

  1. systemctl restart docker
  2. apt-get remove nvidia-container-toolkit for
  3. dpkg –i doca-host-repo-ubuntu<version>_am64.deb</version>
  4. apt-get install cuda-drivers

Question 22

If two ports must be connected, but one is SFP and one is QSFP, for example, to connect a 25 GbE HOST CHANNEL ADAPTER to a QSFP port capable of both 100 GbE and 25 GbE, which of the following solutions would best meet this requirement?

  1. QSA Adapter
  2. SFP to 1G BASE-T (RJ45) adapter
  3. SFP Connectors

Question 23

A system administrator is installing a GPU into a server and needs to avoid damaging the device. What item should be used?

  1. Anti-ESD strap
  2. Gloves
  3. Electric screwdriver
  4. Protective film

Question 24

After configuring NGC CLI with ngc config set, a user receives “Authenticated failed” errors when pulling containers. What step was most likely omitted?

  1. Installing the CLI with apt-get instead of manual extraction.
  2. Entering the API key during ngc config set or storing it in ~/.ngc/config.
  3. Running sudo systemctl restart docker after configuration.
  4. Setting –-format_type=json to enable API interactions.

Question 25

A system administrator needs to validate a GPU-based server and ensure that no errors occur under load. What command should be used?

  1. stress-test –-usage
  2. nvsm stress-test
  3. nvsm dump health
  4. nvsm show health