JN0-351 Practice Test

JN0-351 Practice Test practice questions, page 4 of 5, with answer review and explanations.

Question 16

You are asked to connect an IP phone and a user computer using the same interface on an EX Series switch. The traffic from the computer does not use a VLAN tag, whereas the traffic from the IP phone uses a VLAN tag. Which feature enables the interface to receive both types of traffic?

  1. native VLAN
  2. DHCP snooping
  3. MAC limiting
  4. voice VLAN

Question 17

The ISP1.inet.0 route table has currently no routes in it. What will happen when you commit the configuration shown on the exhibit?

  1. The inet.0 route table will be completely overwritten by the ISP1.inet.0 route table.
  2. The inet.0 route table will be imported into the ISP1.inet.0 route table.
  3. The ISP1.inet.0 route table will be completely overwritten by the inet.0 route table.
  4. The ISP1.inet.0 route table will be imported into the inet.0 route table.

Question 18

Your ISP is announcing a default route to both R1 and R2. You want your network routers to forward all Internet traffic through the R1 device. Which BGP attribute would you use?

  1. MED
  2. next-hop
  3. local preference
  4. origin

Question 19

Which two BGP attributes must be supported by all BGP implementations and must be included in every update? (Choose two.)

  1. AS path
  2. MED
  3. next hop
  4. community

Question 20

Your BGP neighbors, one in the USA and one in France, are not establishing a connection with each other. Referring to the exhibit, which statement is correct?

  1. The BFD liveness is set too low.
  2. The BFD liveness must be configured on the BGP neighbor.
  3. The BFD liveness must be configured on the BGP group.
  4. The BFD liveness is set too high.