HQT-4420

Review 56 HQT-4420 practice questions with answer explanations and community insights.

Question 1

Which two statements are correct regarding hardware upgrades on an HCP G10 system? (Choose two.)

  1. Mixed clusters consisting of both G10 servers and CR servers are not allowed
  2. Node additions are performed using the Configuration menu of the HCP setup program
  3. Upgrades can be performed online or offline
  4. Data is automatically rebalanced after upgrade

Question 2

In the event of a SAN-attached G10 node failure, which LUN configuration will maintain access to a given set of data LUNs?

  1. Data Protection Level 2
  2. HCP LUN replicator
  3. Zero Copy Failover
  4. Dynamic multi-pathing

Question 3

When do you need to check the BIOS configuration on an HCP G10 node?

  1. when replacing an entire node
  2. when upgrading the HCP software version
  3. when replacing a HBA
  4. when replacing a failed hard disk drive

Question 4

You are installing a HCP G10 with attached storage. The system will be networked using four 10 GbE SFP+ interfaces. How many PCIe cards are installed in each HCP G10 node?

  1. 1
  2. 2
  3. 3
  4. 4

Question 5

You are installing an HCP G10 and are now setting the front-end connectivity. The customer has provided you with IP addresses for their network for each node. Which two actions should be performed on each node as part of the OS installation? (Choose two.)

  1. Set the BMC IP address
  2. Set the NTP IP address(es)
  3. Set the front-end IP address
  4. Set the gateway IP address
We are moving to a new platform

CertificationTest is being migrated. Some pages may be slow or briefly unavailable; everything will be back to normal within a few hours. If you run into any issue, email support@certificationtest.net.