HPE0-S51 Practice Test

HPE0-S51 Practice Test practice questions, page 2 of 5, with answer review and explanations.

Question 6

A customer requires an entry-level, all-flash system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency. Which HPE storage system needs the customer's requirements?

  1. MSA 2052
  2. Nimble AF1000
  3. 3PAR 8450
  4. StoreVirtual 4335

Question 7

You are installing a HPE MSA storage system and need to connect the power cooling module (PCM). What should you do to ensure power redundancy?

  1. Ensure that a physical service processor is properly connected to each PCM
  2. Verify that each cooling fan is cabled to a separate controller
  3. Connect each PCM within a shelf to a different power distribution unit (PDU)
  4. Connect redundant power cords from the PCM controller to independent power supplies

Question 8

A customer needs to purchase a redundant pair of SAN switches for their virtualization environment. The customer requires a total of eight 16 Gbps FC storage ports and eighteen 8 Gbps FC host attachments. Which switch does meet the customer's needs at the lowest cost?

  1. HPE 8/24 SAN Switch 16-port Switch with an 8-port Upgrade License
  2. HPE StoreFabric SN6010C 12-port Switch with an On Demand Port Activation License
  3. HPE 8/24 SAN Switch 16-port Switch
  4. HPE StoreFabric SN6010C 48-port Switch

Question 9

A customer is enhancing their server and storage virtualization infrastructure. They need to maximize memory density per rack unit and provide an all-flash array to the environment. Which HPE solutions should they install to fulfill these requirements? (Choose two.)

  1. MSA 2042
  2. ProLiant ML350 Gen10
  3. Nimble AF3000
  4. ProLiant DL380 Gen10
  5. ProLiant DL360 Gen10

Question 10

A customer needs the devices in their non-secure network to communicate in a secure manner. They are considering implementing Kerberos network authentication in their environment. Which impact will this have when using iLO 5 with their HPE ProLiant Gen10 servers?

  1. It will enhance iLO security by leveraging the key stored in the silicon root of trust
  2. It will enable Zero Sign In to log in to iLO without entering a user name and password
  3. It will allow the server's iLO to detect compromised firmware code
  4. It will enable two-factor authentication when users log on to iLO