HCL-BF-PRO-10

HCL-BF-PRO-10 practice questions, page 2 of 3, with answer review and explanations.

Question 6

Several BigFix clients are having an issue with receiving new actions. These clients sometimes show as active in the Console appearing in black with a recent Last Report time. After 45 minutes these same clients appear offline. Sending a Force Refresh causes them to appear active again, but after another 45 minutes, they show as inactive once more. What Task can be run to collect information about the Client Evaluation Cycle to help determine what might be causing this issue?

  1. 353 TROUBLESHOOTING: Run BES Client Diagnostics
  2. 1102 TROUBLESHOOTING:Run BigFix Server Diagnostic
  3. 545 TROUBLESHOOTING: Upload BES Relay Logs
  4. 361 TROUBLESHOOTING: Enable BES Client Usage Profiler

Question 7

What is the recommended scalability limits to consider when designing a WebUI server on BigFix v10.x?

  1. WebUI supports up to 36 concurrent users on a maximum of 300,000 endpoints.
  2. WebUI supports up to 20 concurrent users on a maximum of 300,000 endpoints.
  3. WebUI supports up to 100 concurrent users on a maximum of 250,000 endpoints.
  4. WebUI has no scalability limits and can support all concurrent users and endpoints as long as additional hardware is added.

Question 8

How can the Relay Diagnostics page be secured?

  1. Set the client setting _BESRelay_Diagnostics_Disable to a value of 1.
  2. Configure the relay proxy to only allow internal connections.
  3. Create an .htaccess file to redirect the diagnostics url.
  4. Assign a value to the _BESRelay_Diagnostics_Password client setting.

Question 9

Which of the following settings can be used to improve the response time of the WebUI by adjusting the refresh interval of the WebUI cache? (Choose two.)

  1. _WebUIAppEnv_SP_QUEUE_CONCURRENT
  2. _WebUIAppEnv_DATA_REFRESH_SECONDS
  3. _WebUIAppEnv_CACHE_INTERVAL
  4. _WebUIAppEnv_SITE_CACHE_SIZE
  5. _WebUIAppEnv_CACHE_TTL

Question 10

An administrator managing BigFix on a Windows Root server is planning an automatic upgrade of the BigFix platform to version 10.0.8. Which of the following is the best way to update all of the BigFix installers that were originally created by the Installation Generator during the initial BigFix Server install?

  1. Download each of the installer files for the version 10.0.8 components from the License Download portal webpage and replace the files on the BigFix Server.
  2. No action is required because the BigFix installers are automatically updated with the latest version when a new version of the BigFix platform is released.
  3. The Site Administrator must choose the Update Windows Installation Folders from the Setup tab in the BigFix Administration Tool.
  4. Take action on the Fixlet named Fixlet: Updated Windows Installation Folders - BigFix version 10.0.8 Now Available!