H35-831_V1.0

Review 60 H35-831-V1-0 practice questions with answer explanations and community insights.

Question 1

On the OSPFv3 network shown in the figure, an external route is imported through a command on RTD. AS-External-LSA information is then checked on RTG. According to the following information, what is Originating Router supposed to be?

  1. 4.4.4.4
  2. 7.7.7.7
  3. 5.5.5.5
  4. 6.6.6.6

Question 2

On the network shown in the figure, RT4 and RT5 are ASBRs and import IS-IS routes into OSPF. Only OSPF is used for interworking between RT4 and RT5. The link costs are shown in the figure. The key configurations of RT4 and RT5 are as follows:

  1. RT1 accesses 6.6.6.6 through the RT2 -> RT4 -> RT6 path.
  2. RT1 has two routes to 6.6.6.6, and traffic is balanced between the two routes.
  3. RT1 accesses 6.6.6.6 through the RT3 -> RT5 -> RT6 path.
  4. RT1 has two routes to 6.6.6.6 and selects one of them to forward traffic.

Question 3

When synchronizing LSDBs on a P2P network, IS-IS does not need to send CSNPs.

  1. TRUE
  2. FALSE

Question 4

The system IDs of the same IS-IS device in different processes cannot be the same.

  1. TRUE
  2. FALSE

Question 5

Which of the following statements are correct about IS-IS LSPs? (Choose all that apply.)

  1. LSP fast flooding allows a device to first flood less than a specified number of LSPs to speed up LSDB synchronization.
  2. The shorter the LSP generation interval, the more stable the network.
  3. When the interval defined by the intelligent timer for generating LSPs reaches the maximum value, the interval does not increase if network changes occur.
  4. As the volume of link state information increases, the length of LSPs can be increased to allow each LSP to carry more information.
We are moving to a new platform

CertificationTest is being migrated. Some pages may be slow or briefly unavailable; everything will be back to normal within a few hours. If you run into any issue, email support@certificationtest.net.