H12-811_V2.0

H12-811_V2.0 practice questions, page 4 of 8, with answer review and explanations.

Question 16

After checking the status of GE0/0/1 on R1, you obtain the command output shown below.Which of the following statements are true? (Choose all that apply.)

  1. The physical status of the interface is UP.
  2. The PVID of the interface is 1.
  3. The interface is an Ethernet optical interface.
  4. The MAC address of the interface is b0c7-8733-d65c.

Question 17

During WLAN deployment, a Fit AP fails to go online on the WAC. You log in to the WAC and run the display ap all command to check the AP status. The command output shows that the AP status is unauth, indicating that the AP fails the authentication. You therefore need to confirm this AP on the WAC to allow the AP to go online.

  1. TRUE
  2. FALSE

Question 18

When deploying a WLAN with the WAC + Fit AP architecture on a customer’s live network, you find that APs fail to go online.Which of the following are possible causes? (Choose all that apply.)

  1. The DHCP configuration is incorrect, preventing APs from obtaining IP addresses.
  2. The connection between the WAC and APs is unavailable.
  3. No CAPWAP address is configured on the WAC.
  4. The current working mode of the APs is Fat.

Question 19

Before calling a class from a third-party library in Python code, you must import relevant modules using import or from... import statements.

  1. TRUE
  2. FALSE

Question 20

Assume that you cannot configure an IP address for GE1/0/1 on a Huawei switch.Which of the following commands can you run in the interface view to resolve this problem?

  1. port link-type hybrid
  2. undo portswitch
  3. port link-type trunk
  4. port link-type access