CWDP-305

CWDP-305 practice questions, page 2 of 3, with answer review and explanations.

Question 6

In WLAN location-based services, which metric, despite being commonly used, offers the lowest accuracy when determining device positions?

  1. Angle of Arrival (AoA)
  2. Time of Arrival (ToA)
  3. Time Difference of Arrival (TDoA)
  4. Received Signal Strength Indicator (RSSI)

Question 7

Your customer uses PSK authentication but needs a more secure, certificate-based solution requiring certificates on both the client and server. Which EAP method is the most appropriate?

  1. EAP-FAST
  2. EAP-TTLS
  3. EAP-TLS
  4. PEAP

Question 8

When designing a wireless bridge to connect two offices 13 kilometers (approximately 8 miles) apart, which factor must the Wireless Engineer consider to account for Fresnel Zone clearance?

  1. Earth bulge
  2. Antenna gain
  3. FSPL
  4. Receive sensitivity

Question 9

While conducting a site survey in a heavy machinery repair facility, what essential gear should you use for safety in this challenging environment?

  1. Personal Protective Equipment (PPE)
  2. Low gain antennas
  3. Low power APs
  4. Indoor APs

Question 10

A North American business traveler connects to a hotel’s 2.4 GHz SSID in Europe and notices low RSSI from an AP in the room, but experiences no issues with RSSI in the lobby. What is the most likely reason for the low RSSI in the room?

  1. The AP in the room is using ZigBee instead of Wi-Fi
  2. The AP in the room is transmitting on channel 13 and the traveler associated to an AP on channels 1 through 11 in the lobby
  3. The switchport that the AP is connected to is only capable of transmitting at 10 Mbps
  4. The AP in the room is using Bluetooth instead of Wi-Fi