CWDP-303

CWDP-303 practice questions, page 2 of 3, with answer review and explanations.

Question 6

What metric implements the simplest algorithm and lowest accuracy in networks requiring locations?

  1. Angle of Arrival (AoA)
  2. Time of Arrival (ToA)
  3. Time Difference of Arrival (TDoA)
  4. Received Signal Strength Indicator (RSSI)

Question 7

Your customer is using PSK as their only authentication. They have an industry requirement to move to a stronger solution. Your recommendation is to move to a certificate-based type of authentication where both the client and server require certificates. Which EAP type would be the best fit?

  1. EAP-FAST
  2. EAP-TTLS
  3. EAP-TLS
  4. PEAP

Question 8

A company wants to connect its headquarters to its remote office that is 13 kilometers away using a wireless bridge. What requirement must not be forgotten by their Wireless Engineer when considering the Fresnel Zone?

  1. Earth bulge
  2. Antenna gain
  3. FSPL
  4. Receive sensitivity

Question 9

You are conducting a physical site survey where heavy machinery is repaired. What is a common item required specifically for this type of survey?

  1. Personal Protective Equipment (PPE)
  2. Low gain antennas
  3. Low power APs
  4. Indoor APs

Question 10

A business traveler from North America is in Europe. The hotel only provides coverage in 2.4 GHz. The traveler connects to the hotel's SSID and notices an AP in the hotel room. However, the laptop reports a very low RSSI when connected. The traveler does not have the same problem when connecting in the lobby. What would be the most likely cause of the low RSSI in the hotel room?

  1. The AP in the room is using ZigBee instead of Wi-Fi.
  2. The AP in the room is transmitting on channel 13 and the traveler associated to a non-channel 13 AP located elsewhere.
  3. The switchport that the AP is connected to is only capable of transmitting at 10 Mbps.
  4. The AP in the room is using Bluetooth instead of Wi-Fi.