C9010-022

C9010-022 practice questions, page 2 of 3, with answer review and explanations.

Question 6

Given the output below: What is the purpose of the ent5 interface?

  1. Monitors packet headers and creates the appropriate default routes
  2. Provides a logical network using the IEEE 802.1Q standard
  3. Enables primary and backup EtherChannel adapter failover monitoring
  4. Allows the use of a IPv4 alias within the same subnet as the base adapter

Question 7

The following output shows that a logical volume was renamed, but the change does not appear to be effective. What is the most likely cause?

  1. Only raw logical volumes can be renamed.
  2. The command did not perform the change.
  3. The log device needs to be renamed as well.
  4. The filesystem needs to be remounted.

Question 8

An AIX LPAR has been saved using the mksysb command to a file called LPAR1_mksysb located in the /backup directory. Which command displays the contents of the mksysb backup?

  1. backup –i –v –f /backup/LPAR1_mksysb
  2. restore qf /backup/LPAR1_mksysb
  3. mksysb –v –f /backup/LPAR1_mksysb
  4. listvgbackup -f /backup/LPAR1_mksysb

Question 9

How does PowerSC simplify security compliance and strengthen security?

  1. By integrating with IBM X-Force to receive security updates
  2. By encrypting SRIOV adapter traffic
  3. By providing trusted system extensions
  4. By creating central repository of users

Question 10

A customer has a virtualized system using Virtual I/O Server with multiple client partitions accessing the SAN using NPIV? Which command on the client partition should be run to retrieve the network address of the fiber adapter?

  1. lscfg-vp –l fcs0
  2. lspci –vafcsi | grep "Network Address"
  3. lspath –npiv fcs0 | grep "Network Address"
  4. lsdev | grep fcs0