AVIXA-CTS

AVIXA-CTS practice questions, page 3 of 8, with answer review and explanations.

Question 11

System performance verification occurs when the system is:

  1. in need of repair.
  2. completely installed.
  3. removed from service.
  4. approved by the customer.

Question 12

Which of the following is an EQ type?

  1. gate
  2. limiter
  3. parametric
  4. compressor

Question 13

When calibrating a loudspeaker system, which weight setting on the SPL meter is used for its inclusion of low frequency sound levels in the measurement?

  1. A Weighted
  2. B Weighted
  3. C Weighted
  4. D Weighted

Question 14

The MOST important information to come away with from an initial site survey is the:

  1. key decision maker.
  2. final budget for the entire project.
  3. overall scope AV solution needed.
  4. manufacturers which will be used in the AV system.

Question 15

The limits of the vertical visual field indicate that displays should be positioned where in relation to the viewers’ standard line of sight?

  1. center of the image is precisely on-axis
  2. center of the image is at least 10 degrees above
  3. top of the image is no more than 30 degrees above
  4. bottom of the image is no more than 30 degrees below