70-741

70-741 practice questions, page 6 of 9, with answer review and explanations.

Question 26

You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host that hosts a virtual machine named VM1. Server1 has three network adapter cards that are connected to virtual switches named vSwitch1, vSwitch2 and vSwitch3. You configure NIC Teaming on VM1 as shown in the exhibit. (Click the Exhibit button.) You need to ensure that VM1 will retain access to the network if a physical network adapter card fails on Server1. What should you do?

  1. From Windows PowerShell on VM1, run the Set-VmNetworkAdapterTeamMapping cmdlet.
  2. From Hyper-V Manager on Server1, modify the settings on VM1.
  3. From Windows PowerShell on Server1, run the Set-VmNetworkAdapterFailoverConfiguration cmdlet.
  4. From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.

Question 27

You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment. You need to ensure that the traffic is distributed evenly among the virtual machines that host App1. What should you include in the environment?

  1. Network Controller and Windows Server Network Load Balancing (NLB) nodes
  2. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes
  3. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
  4. Network Controller and Windows Server Software Load Balancing (SLB) nodes

Question 28

You have a server named Server1 that runs Windows Server 2016. Server1 is a Hyper-V host. You have two network adapter cards on Server1 that are Remote Direct Memory Access (RDMA)-capable. You need to aggregate the bandwidth of the network adapter cards for a virtual machine on Server1. The solution must ensure that the virtual machine can use the RDMA capabilities of the network adapter cards. Which command should you run first? To answer, select the appropriate options in the answer area. Hot Area:

Question 29

You have an Active Directory domain that contains several Hyper-V hosts that run Windows Server 2016. You plan to deploy network virtualization and to centrally manage Datacenter Firewall policies. Which component must you install for the planned deployment?

  1. the Data Center Bridging feature
  2. the Network Controller server role
  3. the Routing role service
  4. the Canary Network Diagnostics feature

Question 30

You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 are connected to the same network. On Server1 and Server2, you create an external network switch named Switch1. You have the virtual machine shown in the following table. All three virtual machines are connected to Switch1. You need to prevent applications in VM3 from being able to capture network traffic from VM1 or VM2. The solution must ensure that VM1 retains network connectivity. What should you do?

  1. Configure network virtualization for VM1 and VM2.
  2. Modify the subnet mask of VM1 and VM2.
  3. On Server2, configure the VLAN ID setting of Switch1.
  4. On Server2, create an external switch and connect VM3 to the switch.