500-220 Practice Test

500-220 Practice Test practice questions, page 3 of 4, with answer review and explanations.

Question 11

What is a feature of distributed Layer 3 roaming?

  1. An MX Security Appliance is not required as a concentrator.
  2. An MX Security Appliance is required as a concentrator.
  3. All wireless client traffic can be split-tunneled.
  4. All wireless client traffic is tunneled.

Question 12

Refer to the exhibit. Which design recommendation should be considered?

  1. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
  2. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.
  3. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
  4. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.

Question 13

Which technique is not a PCI requirement but is considered a best practice for limiting the cardholder data environment (CDE) from the remainder of a corporate network?

  1. Limit inbound connections to the CDE while allowing all outbound connections originating from the CDE.
  2. Establishing wired network segmentation between the CDE and the rest of the corporate network.
  3. Implementing identical firewall rules between corporate and CDE egress points.
  4. Incorporate the CDE within the corporate network's established Demilitarized Zone (DMZ).

Question 14

There will be 700 concurrent users streaming video to their laptops. A 30/70 split between 2.4 GHz and 5 GHz RF bands is expected. Using a ratio of 50 clients per AP, roughly how many (rounded to the nearest whole number) APs are needed?

  1. 6
  2. 7
  3. 9
  4. 10

Question 15

One thousand concurrent users stream video to their laptops. A 30/70 split between 2.4 GHz and 5 GHz is used. Based on client count, how many APs (rounded to the nearest whole number) are needed?

  1. 26
  2. 28
  3. 30
  4. 32