Question 1
Which BGP message type is used to verify connectivity during and after BGP session establishment?
- Hello
- Update
- Open
- Keep-Alive
Question 2
Which of the following statements about BGP is FALSE?
- BGP uses Hello messages to dynamically discover BGP peers.
- To establish a BGP session, a TCP session must first be established between the two routers.
- BGP uses the OPEN message to exchange capability parameters between routers.
- BGP was originally designed as an exterior routing protocol.
Question 3
A TCP connection fails to be established with a BGP peer. Which of the following are valid options for the BGP connection state?
- Idle or Connect
- Idle or Active
- Connect or Active
- Connect or Open Sent
Question 4
A BGP session is stuck in the "Connect" state. Which of the following is the most likely reason?
- The remote BGP peer is properly configured but the local router is not.
- The local router is properly configured but the remote BGP peer is not.
- The BGP protocol is administratively disabled on the local router.
- The BGP protocol is administratively disabled on the remote BGP peer.
Question 5
Which of the following statements about BGP is FALSE?
- Peers need to be IP reachable to establish a BGP session.
- Route reflectors can reduce the number of iBGP sessions required.
- iBGP peers have to be adjacent to each other.
- The multihop parameter needs to be configured when eBGP peers are not adjacent to each other.