4A0-104

4A0-104 practice questions, page 3 of 12, with answer review and explanations.

Question 11

Which of the following commands is required to configure an Ethernet port to be used as a SAP in a service?

  1. Configure service sap sap-id access
  2. Configure port port-id Ethernet mode access
  3. Configure port port-id Ethernet mode network
  4. Configure port port-id mode access
  5. Configure port port-id mode network

Question 12

Which of the following tasks must be carried out before deleting an Epipe service? (Choose 4)

  1. Shut down all SAPs associated with the service.
  2. Shut down all SDPs associated with the service.
  3. Delete all SAPs and SDPs associated with the service.
  4. Shut down all physical ports that are bound to a SAP.
  5. Delete the Customer ID.
  6. Shut down the service.

Question 13

Which of the following SAPs will forward all tagged and untagged frames on the port? (Choose 2)

  1. sap 1/1/1
  2. sap 1/1/1:*
  3. sap 1/1/1:*.0
  4. sap 1/1/1:0*
  5. sap 1/1/1:0

Question 14

A customer requests that their Layer 2 Ethernet service be configured to forward frames up to 9000 bytes. The service provider is using MPLS encapsulation. What is the minimum MTU setting for the network ports?

  1. 9000
  2. 9004
  3. 9008
  4. 9022
  5. 9036

Question 15

FRF.5 is a standard that describes which of the following requirements?

  1. ATM to Frame Relay translation.
  2. Frame Relay to Ethernet translation.
  3. ATM tunneling over a Frame Relay core network.
  4. Frame Relay tunneling over an ATM core network.
  5. Frame Relay tunneling over an MPLS/IP core network