499-01

499-01 practice questions, page 6 of 8, with answer review and explanations.

Question 26

For a multi-tier application, what type of delay in AppResponse Xpert's Response Time Composition Chart (RTCC) does the color red represent?

  1. Server
  2. Packet loss
  3. Server and additional back-end tiers
  4. Client
  5. Latency
  6. Network

Question 27

What should be verified when configuring a switched port analyzer (SPAN) for AppResponse Xpert? (Select 4)

  1. Only one direction of virtual local area network (VLAN) traffic is included.
  2. All traffic from every server and end point is included.
  3. Traffic before and after a firewall is included.
  4. The SPAN interface isn't oversubscribed.
  5. The interface speed and type.
  6. The color of the ethernet cable.

Question 28

How many concurrent voice over Internet protocol (VoIP) calls can AppResponse Xpert appliances above ARX1200 monitor?

  1. 250
  2. 500
  3. 1000
  4. Unlimited
  5. Unlimited, but depends on the license
  6. It doesn't support VoIP

Question 29

How does AppResponse Xpert determine who the client is?

  1. The network port
  2. Higher Internet protocol (IP) address
  3. Lower IP address
  4. IP that initiates connection
  5. The user must always define
  6. It references a database table

Question 30

What should you do first when verifying high packet loss?

  1. Download a packet capture from the appliance.
  2. Check that the switched port analyzer (SPAN) is seeing both directions of traffic and remove duplicates.
  3. This value is always correct.
  4. Use AppTransaction Xpert to verify.
  5. Use Pilot to verify.
  6. Ask the network admin.