350-801 Practice Test

350-801 Practice Test practice questions, page 8 of 21, with answer review and explanations.

Question 36

Which service must be enabled when LDAP on Cisco UCM is used?

  1. Cisco Bulk Provisioning Service
  2. Cisco AXL Web Service
  3. Cisco CallManager SNMP Service
  4. Cisco DirSync

Question 37

On a Cisco Catalyst Switch, which command is required to send CDP packets on a switch port that configures a Cisco IP phone to transmit voice traffic in 802.1Q frames, tagged with the voice VLAN ID 221?

  1. Device(config-if)# switchport trunk allowed vlan 221
  2. Device(config-if)# switchport vlan voice 221
  3. Device(config-if)# switchport voice vlan 221
  4. Device(config-if)# switchport access vlan 221

Question 38

Which datastore and protocol is used for saving back-up files within the Disaster Recovery System of Cisco UCM?

  1. local disk on the Cisco UCM server
  2. remote disk on the SFTP server
  3. remote disk on a CIFS share
  4. remote disk on an NFS share

Question 39

Refer to the exhibit. An administrator is attempting to register a SIP phone to a Cisco UCM but the registration is failing. The IP address of the SIP Phone is 10.117.34.222 and the IP address of the Cisco UCM is 10.0.101.10. Pings from the SIP phone to the Cisco UCM are successful. What is the cause of this issue and how should it be resolved?

  1. An NTP mismatch is preventing the connection of the TCP session between the SIP phone and the Cisco UCM. The SIP phone and Cisco UCM must be set with identical NTP sources.
  2. The certificates on the SIP phone are not trusted by the Cisco UCM. The SIP phone must generate new certificates.
  3. DNS lookup for the Cisco UCM FQDN is failing. The SIP phone must be reconfigured with the proper DNS server.
  4. A network device is blocking TCP port 5060 from the SIP phone to the Cisco UCM. This device must be reconfigured to allow traffic from the IP phone.

Question 40

Refer to the exhibit. A Cisco UCM user with directory number 4401 dials 5507, and the call is routed to a Cisco Unified Border Element. Which IP address will the call be sent to?

  1. 10.0.0.2
  2. 10.0.0.3
  3. 10.0.0.4
  4. 10.0.0.1