350-701 Practice Test

350-701 Practice Test practice questions, page 28 of 28, with answer review and explanations.

Question 136

An engineer has been tasked with configuring a Cisco FTD to analyze protocol fields and detect anomalies in the traffic from industrial systems. What must be done to meet these requirements?

  1. Enable traffic analysis in the Cisco FTD.
  2. Implement pre-filter policies for the CIP preprocessor.
  3. Configure intrusion rules for the DNP3 preprocessor.
  4. Modify the access control policy to trust the industrial traffic.

Question 137

An organization uses Cisco FMC to centrally manage multiple Cisco FTD devices. The default management port conflicts with other communications on the network and must be changed. What must be done to ensure that all devices can communicate together?

  1. Change the management port on Cisco FMC so that it pushes the change to all managed Cisco FTD devices.
  2. Set the sftunnel port to 8305.
  3. Manually change the management port on Cisco FMC and all managed Cisco FTD devices.
  4. Set the sftunnel to go through the Cisco FTD.

Question 138

An administrator is establishing a new site-to-site VPN connection on a Cisco IOS router. The organization needs to ensure that the ISAKMP key on the hub is used only for terminating traffic from the IP address of 172.19.20.24. Which command on the hub will allow the administrator to accomplish this?

  1. crypto isakmp identity address 172.19.20.24
  2. crypto ca identity 172.19.20.24
  3. crypto enrollment peer address 172.19.20.24
  4. crypto isakmp key Cisco0123456789 172.19.20.24

Question 139

A Cisco FTD engineer is creating a newIKEv2 policy called s2s00123456789 for their organization to allow additional protocols to terminate network devices with. They currently only have one policy established and need the new policy to be a backup in case some devices cannot support the stronger algorithms listed in the primary policy. What should be done in order to support this?

  1. Change the encryption to AES* to support all AES algorithms in the primary policy.
  2. Make the priority for the primary policy 10 and the new policy 1.
  3. Change the integrity algorithms to SHA* to support all SHA algorithms in the primary policy.
  4. Make the priority for the new policy 5 and the primary policy 1.

Question 140

What is a functional difference between a Cisco ASA and Cisco IOS router with Zone-Based Policy Firewall?

  1. The Cisco ASA can be configured for high availability, whereas the Cisco IOS router with Zone-Based Policy Firewall cannot.
  2. The Cisco IOS router with Zone-Based Policy Firewall can be configured for high availability, whereas the Cisco ASA cannot.
  3. The Cisco ASA denies all traffic by default, whereas the Cisco IOS router with Zone-Based Policy Firewall starts out by allowing all traffic, even on untrusted interfaces.
  4. The Cisco IOS router with Zone-Based Policy Firewall denies all traffic by default, whereas Cisco ASA starts out by allowing traffic until rules are added.