350-401 Practice Test

350-401 Practice Test practice questions, page 42 of 43, with answer review and explanations.

Question 206

Refer to the exhibit. What is the cause of the log messages?

  1. OSPF area change
  2. MTU mismatch
  3. IP address mismatch
  4. hello packet mismatch

Question 207

A network engineer configures BGP between R1 and R2. Both routers use BGP peer group CORP and are set up to use MD5 authentication. This message is logged to the console of router R1: `May 5 39:85:55.469: %TCP-6-BADAUTH` Invalid MD5 digest from 10.10.10.1 (29832) to 10.120.10.1 (179) tebleid -0 Which two configurations allow a peering session to form between R1 and R2? (Choose two.)

  1. R1(config-router)#neighbor 10.10.10.1 peer-group CORP R1(config-router)#neighbor CORP password Cisco
  2. R2(config-router)#neighbor 10.120.10.1 peer-group CORP R2(config-router)#neighbor CORP password Cisco
  3. R2(config-router)#neighbor 10.10.10.1 peer-group CORP R2(config-router)#neighbor PEER password Cisco
  4. R1(config-router)#neighbor 10.120.10.1 peer-group CORP R1(config-router)#neighbor CORP password Cisco
  5. R2(config-router)#neighbor 10.10.10.1 peer-group CORP R2(config-router)#neighbor CORP password Cisco

Question 208

Refer to the exhibit. An engineer implemented several configuration changes and receives the logging message on Switch1. Which action should the engineer take to resolve this issue?

  1. Change Switch2 to switch port mode dynamic auto.
  2. Change the VTP domain to match on both switches.
  3. Change Switch1 to switch port mode dynamic auto.
  4. Change Switch1 to switch port mode dynamic desirable.

Question 209

Drag and drop the characteristics of PIM Dense Mode from the left to the right. Not all options are used. Select and Place:

Question 210

Drag and drop the wireless elements on the left to their definitions on the right. Select and Place: