300-510

300-510 practice questions, page 3 of 11, with answer review and explanations.

Question 11

Refer to the exhibit. Which LSA type is indicated by this router output?

  1. type 3 LSA
  2. type 4 LSA
  3. type 1 LSA
  4. type 2 LSA

Question 12

Which statement about enabling segment routing for IGPs is true?

  1. Segment routing must first be enabled under then routing process and then globally
  2. Segment routing must first be enabled globally and then under the routing process
  3. Segment routing can be enabled only under the routing process
  4. Segment routing can be enabled only globally

Question 13

Which task is performed when troubleshooting LDP?

  1. Execute the ping utility to generate information about the MAC addresses used along the path
  2. Verify that MPLS is disabled globally and enabled on the necessary interfaces in a per-interface basis
  3. Execute the traceroute utility to generate information about the labels used along the path
  4. Verify that Cisco Express Forwarding has been disabled on the network

Question 14

Refer to the exhibit. XR1 and XR2 are sending the prefix 10.11.11.0/24 to XR3. A configured policy on XR1 is incorrectly prepending AS path 11 11 12 12 onto this prefix. A network operator wants to add a policy onto XR3 that will not allow the falsely prepending prefix from being installed. Which policy configuration applied to the XR3 neighbor configuration for XR1 can accomplish this requirement without impact to other or future received routes? A. B. C. D.

Question 15

Refer to the exhibit. Router 1 is connected to router 2 on interface TenGigE0/1. Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?

  1. TenGigE0/1 interface provides the alternate path
  2. A backup path must be statically installed
  3. TenGigE0/2 interface provides the alternate path
  4. A primary path must be manually installed