300-430 Practice Test

300-430 Practice Test practice questions, page 13 of 13, with answer review and explanations.

Question 61

Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?

  1. Policy Profile
  2. AP Join Profile
  3. Flex Profile
  4. RF Profile

Question 62

The Cisco Hyperlocation detection threshold is currently set to -50 dBm. After reviewing the wireless user location, discrepancies have been noticed. To improve the Cisco Hyperlocation accuracy, an engineer attempts to change the detection threshold to -100 dBm. However, the Cisco Catalyst 9800 Series Wireless Controller does not allow this change to be applied. What actions should be taken to resolve this issue?

  1. Disable Cisco Hyperlocation, change the Cisco Hyperlocation detection threshold, and then enable it.
  2. Create a new profile on Cisco CMX with the new Cisco Hyperlocation detection range, and apply it on the WLAN.
  3. Place the APs to monitor mode, shutdown the radios, and then change the Cisco Hyperlocation detection threshold.
  4. Shutdown all radios on the controller, change the Cisco Hyperlocation detection range, and enable the radios again.

Question 63

An engineer must track guest traffic flow using the WLAN infrastructure. Which Cisco CMX feature must be configured and used to accomplish this tracking?

  1. analytics
  2. connect and engage
  3. presence
  4. detect and locate

Question 64

An engineer has successfully implemented 10 active RFID tags in an office environment. The tags are not visible when the location accuracy is tested on the Cisco CMX Detect and Locate window. Which setting on Cisco CMX allows the engineer to view the tags?

  1. Enable RFID tags in tracking options.
  2. Enable probing clients for active tags.
  3. Define an RFID group globally and add the tags.
  4. Enable hyperlocation services for RFID.

Question 65

An engineer completed the basic installation for two Cisco CMX servers and is in the process of configuring high availability, but it fails. Which two statements about the root of the issue are true? (Choose two.)

  1. The Cisco CMX instances are installed in the same subnet.
  2. The types of the primary and secondary Cisco CMX installations differ.
  3. The delay between the primary and secondary instance is 200 ms.
  4. The sizes of the primary and secondary Cisco CMX installations differ.
  5. Both Cisco CMX installations are virtual.