300-425 Practice Test practice questions, page 9 of 11, with answer review and explanations.
Question 41
A network engineer is working on a design for a wireless network that must support data, voice, and location services. To support these services, which access point placement must the engineer use?
corner only
perimeter and corner
perimeter only
indoor and outdoor
Question 42
A customer has noticed that Client Band Select is enabled and no clients are utilizing the 5 GHz band. Which three parameters must be met to ensure that wireless clients use the 5 GHz band? (Choose three.)
Ensure that channel bonding is enabled on the WLAN.
Ensure that the co-channel interference has not exceeded גˆ’85 dBm.
Ensure that the UNII-2 extended channels are enabled on the 802.11a radios.
Ensure that the client is receiving RSSI above the minimum band select RSSI threshold.
Ensure that the client is dual-band capable.
Ensure that the WLAN has 802.11a enabled.
Question 43
An engineer is reducing the subnet size of the corporate WLAN by segmenting the VLAN into smaller subnets. Clients will be assigned a subnet by location. Which type of groups should the engineer use to map the smaller subnets to the corporate WLAN?
WLC port groups
RF groups
AP groups
interface groups
Question 44
A customer has determined that aesthetics is a primary concern for their upcoming guest deployment. Which design consideration can be leveraged to address this concern?
Paint the access point to cover the LED from being noticeable.
Use enclosures to hide the wireless infrastructure in the surrounding environment.
Use AIR-AP-BRACKET-1 to allow for greater mounting locations
Deploy environmentally friendly cabling components to blend into the environment.
Question 45
An engineer has deployed a group of APs in an auditorium and notices that the APs are showing high co-channel interference. Which profile is used to adjust the parameters for these high-density APs?