300-410 Practice Test

300-410 Practice Test practice questions, page 17 of 25, with answer review and explanations.

Question 81

Refer to the exhibit. An engineer configures the router 10.1.100.10 for EIGRP autosummarization so that R1 should receive the summary route of 10.0.0.0/8. However, R1 receives more specific /24 routes. Which action resolves this issue?

  1. Router R1 should configure ip summary address eigrp (AS number) 10.0.0.0 255.0.0.0 for the R1 Fast Ethernet 0/0 connected interface.
  2. Router R1 should configure ip route 10.0.0.0 255.0.0.0 null 0 for the routes that are received on R1.
  3. Router 10.1.100.10 should configure ip route 10.0.0.0 255.0.0.0 null 0 for the routes that are summarized toward R1.
  4. Router 10.1.100.10 should configure ip summary address eigrp (AS number) 10.0.0.0 255.0.0.0 for the R1 Fast Ethernet 0/0 connected interface.

Question 82

Refer to the exhibit. Which command must be configured to make VRF CCNP work?

  1. interface Loopback0 ip address 10.1.1.1 255.255.255.0 vrf forwarding CCNP
  2. interface Loopback0 ip address 10.1.1.1 255.255.255.0
  3. interface Loopback0 vrf forwarding CCNP
  4. interface Loopback0 ip address 10.1.1.1 255.255.255.0 ip vrf forwarding CCNP

Question 83

Refer to the exhibits. An engineer investigates a routing issue on R1 and finds that traffic destined to 5.5.5.0/24 does not take all of the paths. Which action resolves the issue?

  1. Increase the variance value in EIGRP.
  2. Decrease the variance value in EIGRP.
  3. Remove the adjacency of R3 from EIGRP.
  4. Stop advertising 192.168.13.0/24 in EIGRP.

Question 84

Drag and drop the MPLS VPN concepts from the left onto the correct descriptions on the right. Select and Place:

Question 85

Refer to the exhibits. Phase-3 tunnels cannot be established between spoke-to-spoke in DMVPN. Which two commands are missing? (Choose two.)

  1. The ip nhrp redirect command is missing on the spoke routers.
  2. The ip nhrp shortcut command is missing on the spoke routers.
  3. The ip nhrp redirect command is missing on the hub router.
  4. The ip nhrp shortcut command is missing on the hub router.
  5. The ip nhrp map command is missing on the hub router.