300-410 Practice Test

300-410 Practice Test practice questions, page 14 of 25, with answer review and explanations.

Question 66

Refer to the exhibit. When the FastEthernet0/1 goes down, the route to 172.29.0.0/16 via 192.168.253.2 is not installed in the RIB. Which action resolves the issue?

  1. Configure feasible distance greater than the reported distance.
  2. Configure feasible distance greater than the successor's feasible distance.
  3. Configure reported distance greater than the successor's feasible distance.
  4. Configure reported distance greater than the feasible distance.

Question 67

Refer to the exhibit. AS111 is receiving its own routes from AS200 causing a loop in the network. Which configuration provides loop prevention?

  1. router bgp 111 neighbor 195.1.1.1 as-override no neighbor 195.1.2.2 allowas-in
  2. router bgp 111 no neighbor 195.1.1.1 allowas-in no neighbor 195.1.2.2 allowas-in
  3. router bgp 111 neighbor 195.1.2.2 as-override no neighbor 195.1.1.1 allowas-in
  4. router bgp 111 neighbor 195.1.1.1 as-override neighbor 195.1.2.2 as-override

Question 68

Refer to the exhibit. AS65510 iBGP is configured for directly connected neighbors. R4 cannot ping or traceroute network 192.168.100.0/24. Which action resolves this issue?

  1. Configure R1 as a route reflector server and configure R2 and R3 as route reflector clients.
  2. Configure R4 as a route reflector server and configure R2 and R3 as route reflector clients.
  3. Configure R4 as a route reflector server and configure R1 as a route reflector client.
  4. Configure R1 as a route reflector server and configure R4 as a route reflector client.

Question 69

Users report issues with reachability between areas as soon as an engineer configured summary routes between areas in a multiple area OSPF autonomous system. Which action resolves the issue?

  1. Configure the area range command on the ASBR.
  2. Configure the summary-address command on the ASBR.
  3. Configure the summary-address command on the ABR.
  4. Configure the area range command on the ABR.

Question 70

Refer to the exhibit. Which set of commands restore reachability to loopback0?

  1. interface loopback0 ip address 4.4.4.4 255.255.255.0 ip ospf network point-to-point
  2. interface loopback0 ip address 4.4.4.4 255.255.255.0 ip ospf interface area 10
  3. interface loopback0 ip address 4.4.4.4 255.255.255.0 ip ospf network broadcast
  4. interface loopback0 ip address 4.4.4.4 255.255.255.0 ip ospf interface type network