201 Practice Test

201 Practice Test practice questions, page 3 of 4, with answer review and explanations.

Question 11

Which process or system can be monitored by the BIG-IP system and used as a failover trigger in a redundant pair configuration?

  1. bandwidth utilization
  2. duplicate IP address
  3. CPU utilization percentage
  4. VLAN communication ability

Question 12

Assuming there are open connections through an active system's NAT and a fail over occurs, by default, what happens to those connections?

  1. All open connections will be lost.
  2. All open connections will be maintained.
  3. The "Mirror" option must be chosen on the NAT and the setting synchronized prior to the connection establishment.
  4. Longlived connections such as Telnet and FTP will be maintained while shortlived connections such as HTTP will be lost.
  5. All open connections are lost, but new connections are initiated by the newly active BIG IP, resulting in minimal client downtime.

Question 13

A virtual server is defined per the charts. The last five client connections were to members C, D, A, B, B. Given the conditions shown in the above graphic, if a client with IP address 205.12.45.52 opens a connection to the virtual server, which member will be used for the connection.

  1. 172.16.20.1:80
  2. 172.16.20.2:80
  3. 172.16.20.3:80
  4. 172.16.20.4:80
  5. 172.16.20.5:80

Question 14

Under what condition must an appliance license be reactivated?

  1. Licenses only have to be reactivated for RMAs no other situations.
  2. Licenses generally have to be reactivated during system software upgrades.
  3. Licenses only have to be reactivated when new features are added (IPv6, Routing Modules, etc) no other situations.
  4. Never. Licenses are permanent for the platform regardless the version of software installed.

Question 15

Which three methods can be used for initial access to a BIG-IP system? (Choose three.)

  1. CLI access to the serial console port
  2. SSH access to the management port
  3. SSH access to any of the switch ports
  4. HTTP access to the management port
  5. HTTP access to any of the switch ports
  6. HTTPS access to the management port
  7. HTTPS access to any of the switch ports