201-01

201-01 practice questions, page 10 of 10, with answer review and explanations.

Question 46

When Cascade Pilot is connected to Cascade Shark:

  1. Cascade Shark interfaces and captures job traces appear under the devices tab within the sources panel.
  2. Cascade Shark interfaces appear under the devices tab of the sources panel AND Cascade Shark capture job traces appear under the files tab of the sources panel.
  3. Cascade Shark interfaces and captures job traces appear in the views panel.
  4. Cascade Shark interfaces must be selected from the home menu to begin a capture.

Question 47

How are trace clips created in Cascade Pilot? (Select 2)

  1. Select a Capture Job, right-click, and select "Create Trace Clip".
  2. Drag a bar from a Bar Chart to the Capture Job.
  3. Click the + button in the Capture Job item and select a time window.
  4. Select a time window and apply a Cascade Pilot filter.

Question 48

Protocols that are typically monitored in TCP/IP networks by visibility tools include (Select 3):

  1. SAN HBA Protocol
  2. TCP Protocols such as HTTP and HTTPS
  3. UDP Protocols such as SMTP and Video streaming
  4. IPv4 Protocols including TCP, UDP, and ICMP
  5. IPv4 Protocols such as x.25, TTY and TTL

Question 49

What is the maximum capacity of a Standard Cascade Profiler appliance in terms of the number of IP flows that it can process?

  1. 100,000 Flows per Minute
  2. 200,000 Flows per Minute
  3. 300,000 Flows per Minute
  4. 400,000 Flows per Minute
  5. 500,000 Flows per Minute
  6. 600,000 Flows per Minute