200-301 Practice Test

200-301 Practice Test practice questions, page 37 of 56, with answer review and explanations.

Question 181

Refer to the exhibit. Which switch in this configuration will be elected as the root bridge? SW1: 0C:E0:38:41:86:07 - SW2: 0C:0E:15:22:05:97 - SW3: 0C:0E:15:1A:3C:9D - SW4: 0C:E0:18:A1:B3:19 -

  1. SW1
  2. SW2
  3. SW3
  4. SW4

Question 182

Refer to the exhibit. An engineer is required to verify that the network parameters are valid for the users' wireless LAN connectivity on a /24 subnet. Drag and drop the values from the left onto the network parameters on the right. Not all values are used. Select and Place:

Question 183

An engineer needs to configure LLDP to send the port description type length value (TLV). Which command sequence must be implemented?

  1. switch(config-if)#lldp port-description
  2. switch#lldp port-description
  3. switch(config-line)#lldp port-description
  4. switch(config)#lldp port-description

Question 184

Refer to the exhibit. Which switch becomes the root bridge?

  1. S1
  2. S2
  3. S3
  4. S4

Question 185

Which configuration ensures that the switch is always the root for VLAN 750?

  1. Switch(config)#spanning-tree vlan 750 priority 38418607
  2. Switch(config)#spanning-tree vlan 750 priority 0
  3. Switch(config)#spanning-tree vlan 750 root primary
  4. Switch(config)#spanning-tree vlan 750 priority 614440