200-301 Practice Test

200-301 Practice Test practice questions, page 18 of 56, with answer review and explanations.

Question 86

What is the maximum bandwidth of a T1 point-to-point connection?

  1. 1.544 Mbps
  2. 2.048 Mbps
  3. 34.368 Mbps
  4. 43.7 Mbps

Question 87

What are two similarities between UTP Cat 5e and Cat 6a cabling? (Choose two.)

  1. Both support speeds up to 10 Gigabit.
  2. Both support speeds of at least 1 Gigabit.
  3. Both support runs of up to 55 meters.
  4. Both support runs of up to 100 meters.
  5. Both operate at a frequency of 500 MHz.

Question 88

What is a characteristic of cloud-based network topology?

  1. onsite network services are provided with physical Layer 2 and Layer 3 components
  2. wireless connections provide the sole access method to services
  3. physical workstations are configured to share resources
  4. services are provided by a public, private, or hybrid deployment

Question 89

Which network action occurs within the data plane?

  1. reply to an incoming ICMP echo request
  2. make a configuration change from an incoming NETCONF RPC
  3. run routing protocols (OSPF, EIGRP, RIP, BGP)
  4. compare the destination IP address to the IP routing table

Question 90

Refer to the exhibit. R1 has just received a packet from host A that is destined to host B. Which route in the routing table is used by R1 to reach host B?

  1. 10.10.13.0/25 [1/0] via 10.10.10.2
  2. 10.10.13.0/25 [108/0] via 10.10.10.10
  3. 10.10.13.0/25 [110/2] via 10.10.10.6
  4. 10.10.13.0/25 [110/2] via 10.10.10.2