156-315.81

156-315.81 practice questions, page 4 of 14, with answer review and explanations.

Question 16

When changes are made to a Rule base, It is important to __________ to enforce changes.

  1. Publish database
  2. Activate policy
  3. Install policy
  4. Save changes

Question 17

Why is a Central License the preferred and recommended method of licensing?

  1. Central Licensing actually not supported with Gaia.
  2. Central Licensing is the only option when deploying Gala.
  3. Central Licensing ties to the IP address of a gateway and can be changed to any gateway if needed.
  4. Central Licensing ties to the IP address of the management server and is not dependent on the IP of any gateway in the event it changes.

Question 18

What does the "unknown" SIC status shown on SmartConsole mean?

  1. SIC activation key requires a reset
  2. Administrator input the wrong SIC key
  3. The management can contact the Security Gateway but cannot establish Secure Internal Communication
  4. There is no connection between the Security Gateway and Security Management Server

Question 19

What are valid authentication methods for mutual authenticating the VPN gateways?

  1. PKI Certificates and Kerberos Tickets
  2. PKI Certificates and DynamicID OTP
  3. Pre-Shared Secrets and Kerberos Ticket
  4. Pre-shared Secret and PKI Certificates

Question 20

What are the correct steps upgrading a HA cluster (M1 is active, M2 is passive) using Multi-Version Cluster(MVC)Upgrade?

  1. 1) Enable the MVC mechanism on both cluster members #cphaprob mvc on 2) Upgrade the passive node M2 to R81.10 3) In SmartConsole, change the version of the cluster object 4) Install the Access Control Policy and make sure that the installation will not stop if installation on one cluster member fails 5) After examine the cluster states upgrade node M1 to R81.10 6) On each Cluster Member, disable the MVC mechanism
  2. 1) Enable the MVC mechanism on both cluster members #cphaprob mvc on 2) Upgrade the passive node M2 to R81.10 3) In SmartConsole, change the version of the cluster object 4) Install the Access Control Policy 5) After examine the cluster states upgrade node M1 to R81.10 6) On each Cluster Member, disable the MVC mechanism and Install the Access Control Policy
  3. 1) In SmartConsole, change the version of the cluster object 2) Upgrade the passive node M2 to R81.10 3) Enable the MVC mechanism on the upgraded R81.10 Cluster Member M2 #cphaconf mvc on 4) Install the Access Control Policy and make sure that the installation will not stop if installation on one cluster member fails 5) After examine the cluster states upgrade node M1 to R81.10 6) On each Cluster Member, disable the MVC mechanism and Install the Access Control Policy SmartConsole, change the version of the cluster object
  4. 1) Upgrade the passive node M2 to R81.10 2) Enable the MVC mechanism on the upgraded R81.10 Cluster Member M2 #cphaconf mvc on 3) In SmartConsole, change the version of the cluster object 4) Install the Access Control Policy 5) After examine the cluster states upgrade node M1 to R81.10 6) On each Cluster Member, disable the MVC mechanism and Install the Access Control Policy upgrade the passive node M2 to R81.10