156-315.77

156-315.77 practice questions, page 18 of 30, with answer review and explanations.

Question 86

In a R77 ClusterXL Load Sharing configuration, which type of ARP related problem can force the use of Unicast Mode (Pivot) configuration due to incompatibility on some adjacent routers and switches?

  1. MGCP MAC address response to a Multicast IP request
  2. Multicast MAC address response to a Unicast IP request
  3. Unicast MAC address response to a Multicast IP request
  4. Multicast MAC address response to a RARP request

Question 87

How do new connections get established through a Security Gateway with SecureXL enabled?

  1. New connections are always inspected by the firewall and if they are accepted, the subsequent packets of the same connection will be passed through SecureXL
  2. New connection packets never reach the SecureXL module.
  3. The new connection will be first inspected by SecureXL and if it does not match the drop table of SecureXL, then it will be passed to the firewall module for a rule match.
  4. If the connection matches a connection or drop template in SecureXL, it will either be established or dropped without performing a rule match, else it will be

Question 88

If the number of kernel instances for CoreXL shown is 6, how many cores are in the physical machine?

  1. 6
  2. 8
  3. 3
  4. 4

Question 89

Which of the following is NOT accelerated by SecureXL?

  1. SSH
  2. HTTPS
  3. FTP
  4. Telnet

Question 90

How can you disable SecureXL via the command line (it does not need to survive a reboot)?

  1. fw ctl accel off
  2. securexl off
  3. fwaccel off
  4. fw xl off