156-315.77

156-315.77 practice questions, page 14 of 30, with answer review and explanations.

Question 66

Which of the following would be a result of having more than one active Security Management Server in a Management High Availability (HA) configuration?

  1. An error notification will popup during SmartDashboard login if the two machines can communicate indicating Collision status.
  2. The need to manually synchronize the secondary Security Management Server with the Primary Security Management Server is eliminated.
  3. Allows for faster seamless failover: from active-to-active instead of standby-to-active.
  4. Creates a High Availability implementation between the Gateways installed on the Security Management Servers.

Question 67

When Load Sharing Multicast mode is defined in a ClusterXL cluster object, how are packets being handled by cluster members?

  1. Only one member at a time is active. The active cluster member processes all packets.
  2. All members receive all packets. All members run an algorithm which determines which member processes packets further and which members delete the packet from memory.
  3. The pivot machine will handle it.
  4. All cluster members process all packets and members synchronize with each other.

Question 68

Which of the following does NOT happen when using Pivot Mode in ClusterXL?

  1. The Pivot forwards the packet to the appropriate cluster member.
  2. The Pivot’s Load Sharing decision function decides which cluster member should handle the packet.
  3. The Security Gateway analyzes the packet and forwards it to the Pivot.
  4. The packet is forwarded through the same physical interface from which it originally came, not on the sync interface.

Question 69

When distributing IPSec packets to gateways in a Load Sharing Multicast mode cluster, which valid Load Sharing method will consider VPN information?

  1. Load Sharing based on SPIs
  2. Load Sharing based on IP addresses, ports, and serial peripheral interfaces
  3. Load Sharing based on IP addresses, ports, and security parameter indexes
  4. Load Sharing based on ports, VTI, and IP addresses

Question 70

By default, the Cluster Control Protocol (CCP) uses this to send delta sync messages to other cluster members.

  1. Multicast
  2. Unicast
  3. Anycast
  4. Broadcast